GE Dishwasher Silverware Basket WD28X265 WD28X318

Buy Cheap GE Dishwasher Silverware Basket WD28X265 WD28X318

Buy Low Price From Here Now
THIS GENERAL ELECTRIC WD28X265 SILVERWARE BASKET WORKS WITH MANY GENERAL ELECTRIC AND OTHER BRAND DISHWASHERS
Readmore

Technical Details

- THIS GENERAL ELECTRIC WD28X265 SILVERWARE BASKET WORKS WITH MANY GENERAL ELECTRIC AND OTHER BRAND
- DISHWASHERS
- Works with the following models: GE GLD4100L00BB, GE GLD4100L00CC, GE GLD4100L00WW
- GE GLD4100M00BB, General Electric GLD4100M00BB, GE GLD4100M00CC, General Electric GLD4100M00CC
See more technical details

 "Fast Service" 2009-09-12
By DVD Guru (Albuquerque, NM USA)
This came in two days, which was far faster than expected. The price was still cheaper than GE.


Images Product

Buy GE Dishwasher Silverware Basket WD28X265 WD28X318 Now

Whirlpool Electric Dryer Heating Element 279838

Buy Cheap Whirlpool Electric Dryer Heating Element 279838

Buy Low Price From Here Now
THIS WHIRLPOOL 279838 DRYER HEATING ELEMENT IS DESIGNED TO FIT MANY WHIRLPOOL, ESTATE, KITCHENAID, ROPER AND KENMORE DRYERS. THIS HEATING ELEMENT WORKS WHEN A SWITCH ON THE MOTOR TURNS ON THE HEATING ELEMENT, WHICH GLOWS RED HOT AND BEGINS TO HEAT THE DRYER. WHEN THE DRYER REACHES A PRE-SET TEMPERATURE THE HEATING ELEMENT IS TURNED OFF. WHEN THE DRYER THEN FALLS TO A CERTAIN TEMPERATURE THE HEATING ELEMENT TURNS BACK ON AND HEATS UP THE DRYER. THIS PROCESS REPEATS ITSELF UNTIL THE CYCLE IS OVER AND THE CLOTHES ARE DRY.

SPECIFICATIONS:

REPLACEMENT FOR PARTS: 2438, 3398064, 3403585, 8565582, AP3094254, PS334313, PT9282762

DETAILS: 5200 WATT, 240 VOLT HEATING ELEMENT.
Readmore

Technical Details

- THIS WHIRLPOOL 279838 DRYER HEATING ELEMENT IS DESIGNED TO FIT MANY WHIRLPOOL, ESTATE, KITCHENAID
- ROPER AND KENMORE DRYERS. THIS HEATING ELEMENT WORKS WHEN A SWITCH ON THE MOTOR TURNS ON THE
- HEATING ELEMENT, WHICH GLOWS RED HOT AND BEGINS TO HEAT THE DRYER. WHEN THE DRYER REACHES A
- Works with the following models: Whirlpool LEC6646AQ0, Whirlpool LER5636, Whirlpool REX3615EW1
- Whirlpool WED5530SQ0, Whirlpool WED5700SW0, Whirlpool WED6200SW0
See more technical details

Images Product

Buy Whirlpool Electric Dryer Heating Element 279838 Now

Sanus HTB3 Tear Drop Home Theater/Box Speaker Stands

Buy Cheap Sanus HTB3 Tear Drop Home Theater/Box Speaker Stands

Buy Low Price From Here Now
Sanus_ HTB3_ Steel Construction, Home Theater/Box speaker Stands w/ Tear Drop Base
Readmore

Technical Details

- Adjustable Height
- Stylish Look with Tear Drop Base
- Fits Most Small Speakers
- Raises Speakers to Optimum Height
- Heavy guage steel Pilars
See more technical details

 "Excellent Quality" 2009-10-22
By B. Raymond
Excellent quality. Packaged well, so no damage during shipping. Was easy to pull 16 gauge speaker wire through and attach my Energy Take Classics. Also, heavier than I expected, but that's a good thing.

 "Works Well for Me" 2009-10-18
By C. Gittins
I purchased these stands for my Take Classic speakers. They are small speakers (about 4 1/4 x 4 1/4 x 7 3/4). What I found was that the stands hold the speakers, but they don't fit them well. The mounting bracket on my speakers is at the top of the speaker, but the curve of the stands doesn't allow me to turn the stand the proper way. I have to turn the curve toward the front of the stand. It works because the speaker is light, but it is less stable. Not sure why they don't have a version with a longer neck (part above the curve), as it seems these stands wouldn't fit many speakers except those with mounting brackets at the bottom of the speaker.



I really like the mounting options that came with the stands as well as the ability to hide the speaker wire inside the stand. Very good price at Amazon.

 "Great Product!" 2009-10-15
By Michael Frost (Atlanta, GA)
This was one of the smarter buys I've made. I almost purchased stands from Best Buy which were twice as much and I'm glad I decided to give these a try. I bought two pairs of these for my family room surround sound system. Very easy to install and run the wire up the stand. A hint for those who have trouble with running the wire up the stand I suggest doing it before you put the bottom and top together. It also helps if you have some needlenose pliers to pull the wire out of the opening.



Extremely sturdy on carpet (even without the included carpet spikes). I can only imagine how much better they would be on hardwoods. Comes with so many different brackets for the speakers.



I plan on purchasing two more pairs of these when I buy my surround sound system for the master bedroom! A++

 "Sleek and Quality" 2009-09-02
By B. Patout (Arlington, VA)
These made my Logitech 5.1 system look so much better. They come with feet attachments for both carpet and wood floor which is nice for acoustic value. Dust clings a little bit because of surface texture but is removed easy.

 "Great Stands!!" 2009-07-14
By H. Rosales
After trying the cheaper Atlantic stands from amazon (which are horrible BTW), I finally found the stands I was looking for. The Quality is amazing. The instructions are a little vague, but everything else is superb. I bought these stands for the Sony BRAVIA DAV-HDX589W 5.1-Channel Theater System. They work beautifully.


Images Product

Buy Sanus HTB3 Tear Drop Home Theater/Box Speaker Stands Now

SANUS SYSTEMS BF-24B Wood Speaker Stands

Buy Cheap SANUS SYSTEMS BF-24B Wood Speaker Stands

Buy Low Price From Here Now
stand height: 24" * top plate measures 6-1/2" x 6-1/2" * base plate measures 11-5/16" x 9-1/2" * supports 20 lbs. *
Readmore

Technical Details

- 24-Inch high
- Concealed wire management
- Furniture-grade appearance with upscale performance
- Twin contoured pillars give support and rigidity
- Constructed of medium density fibercore to minimize resonance
See more technical details

 "Great speaker stands for the price" 2009-08-16
By woohhaa (Memphis, TN)
The Sanus BF-24B speaker stands work well and have kept my speakers off the floor for the better part of a year. They are easy to assemble and come with some little spikes that act as feat, keeping the stands securely in place in carpet. I have 2 rambunctious Rottweilers and a crazy mutt and I can't tell you how many times they have bumped into my right front speaker, but the stand has yet to tip, probably due to the previously mentioned spikes digging into the living room carpet.



The base of the stand has a slightly porous surface that tends to hold dust making it difficult to clean and catching all the lint from your rags or paper towels. The rear piece is very flimsy and pops out easily.



Over all it's a great product and goes well with out entertainment center.

 "They work" 2009-07-23
By Jmdeis11 (NY)
They are pieces of wood(-like material) that hold a speaker a couple feet off the ground. I don't understand why speaker stands are so expensive. If I had a saw and some time I would have tried to make my own. But these are the cheapest ones I could find, and I was surprised that they are actually pretty good quality (and look good too). Took about 10 minutes to put both of them together, very simple with no issues.

 "Surprising quality" 2009-07-20
By J. Kappes (Sacramento, CA)
Just received and built two sets of these stands for my home theater system to get a better audio profile with the raised speakers. I must say that I am pleasantly surprised as to the quality of these stands for the price. They were assembled seemliness and feel very solid in construction. I also like the hidden wire channel down the center of the stand (although since I am using white wire, you can see it through the front on 1 of the 4 stands in which the wire pushed forward). I would highly recommend these for anyone looking for some quality budget speaker stands.

 "does the job" 2009-06-29
By CASEY W. NORDELL (Chapel Hill, NC)
This pair of stands work as advertised to lift bookshelf speakers 24 inches off the ground achieving the relative height of a tower speaker. Costs much less than competing stands. They are however made of cheap material if you can about that kind of stuff. I just assembled them, put my speakers on them, and forgot about it. Haven't run into any problems. Other reviews posted here are accurate in their description of this product and it's relative strengths and shortcomings.

 "Great Value" 2009-04-30
By alb58
I couldn't decide between the BF and NF-series speaker stands for a long time, thinking that there might be something low-quality about these BF-24B (cheaper) stands. However, after visitng the website, looking at the pics and reviews for both, decided to go with the lower-cost option and am absolutely content with that choice. Stands look great, are easy to assemble, structurally secure and sound great with my P162s. I really don't know if a true audiophile could tell the difference between BF and NF, so it mainly comes down to the look and finish. In my mind paying twice as much for slightly better looking (yet, functinally same) stands wasn't worth it - but you decide.


Images Product

Buy SANUS SYSTEMS BF-24B Wood Speaker Stands Now

Sanus Systems VMAVB Component Shelf Wall Mount (Black)

Buy Cheap Sanus Systems VMAVB Component Shelf Wall Mount (Black)

Buy Low Price From Here Now
The VisionMount VMAV is a unique and stylish mounting system for a variety of audio/visual equipment up to 45 lbs. Solid heavy-gauge steel construction provides strength and durability. Its mount arms have pads to cushion, protect and stabilize AV components. Wall mount can be used alone or stacked for traditional DVRs, satellite receivers, surround receivers or DVD players.
Readmore

Technical Details

- Wall mountable component shelf
- Weight capacity: 45 lbs
- Can be used independently or with other Sanus mounts
- 14 1/2" W x 9" H x 17 1/4" D
See more technical details

 "Component shelf wall mount with fixed position" 2009-09-17
By Jeffrey P. Booren (Portland, OR USA)
The product went up easily and supports the components. It would have been handy if the direction the component faces could be altered, even if just 15-20 degrees to accomodate a corner install that faces out near the center of the room.

 "Accessory Shelf" 2009-09-12
By Stephen C. Ray (Montreal)
This is a great product. We bought two. As long as you have a few basic tools (a level, a drill. Etc) then the install is quick.

 "Works as well as can be expected" 2009-06-25
By Larry C. Dewey (Toano, VA)
I'm pretty picky and I don't usually give 5 stars. This product is pretty good. It does not include a class shelf to set AV component on. However, I think a class shelf is unnecessary as it restricts air flow anyway and is just anther thing to clean. This thing is sturdy and easy to mount. The only thing keeping it from getting a "5" is the fit and finish. Screw holes were a little off center for securing the shelf to the wall bracket. I would also like this to be modular and allow multiple shelves to be linked together and allow cables to pass through. Also the price is a bit high considering the simple design and very litte materials invlolved in production.

 "Great shelving solution at a fair price." 2009-06-03
By rpflex (Cajun Country, LA United States)
This component shelf was extremely easy to mount and works great. It is good looking and is the perfect solution for a couple of components mounted out of the way. I'd prefer to have the arm swivel so components could be angled in or out, but the price would probably be prohibitive.

 "Great Floating Shelf" 2009-05-09
By Odie (Arizona)
Awesome, inexpensive way to float your components without a large shelf. Extremely sturdy when you mount it as directed on a stud in the wall. Give excellent support and hasn't sagged on give signs of ever sagging.


Images Product

Buy Sanus Systems VMAVB Component Shelf Wall Mount (Black) Now